Canon XC10 Instruction Manual

Also see for XC10: Quick guide Quick start guide

Contents

Canon XC10 Instruction Manual Manual pdf 125 page image

125Browser Remote: Controlling the Camcorder from a Network DeviceMenusTable of Contents IndexBrowser Remote: Controlling the Camcorder from a NetworkDeviceUsing a camera access point connection, in which the camcorder itself acts as an access point, you canconnect a device such as a smartphone (such connected devices are hereafter referred to as “networkdevices”). You can then control the camcorder remotely from the network device’s Web browser using theBrowser Remote application. Browser Remote lets you monitor the image through live view, record clips andphotos, and remotely control the shutter speed, gain and other settings. You can also check the recordingmedia, remaining recording time, time code, etc.* For details about compatible devices, operating systems, Web browsers, etc., please visit your local Canon Web site.Setting Up Browser RemoteYou can set a unique camcorder identification code and designate the port that the Browser Remote applicationshould use when accessing the camcorder through network. The port number (HTTP protocol) used by BrowserRemote is usually set to port 80, but you can change it if necessary. The camcorder ID will appear on theBrowser Remote screen, making it easy to identify which camcorder the application is controlling in case of amulti-camera shooting setup.To enter information for various settings, use the virtual keyboard (A 121).1 Press the MENU button.2 Open the [Browser Connection Settings] submenu.[— Wi-Fi Setup] > [1] > [Browser Connection Settings]3 To change the camcorder ID, touch [Camcorder ID]. Enter thedesired ID and then touch [OK].4 To change the port number, touch [80]. Enter a different portnumber and then touch [OK].5 Touch [OK] twice and then touch [X].NOTES• During a Wi-Fi connection, it is not possible to change the camcorder’s Wi-Fi settings.Starting Browser RemoteAfter connecting the network device to the camcorder, you can start theBrowser Remote application on the Web browser* of the network device.* A Web browser that supports JavaScript and is enabled to accept cookies is required.Preparations on the Camcorder1 Press the MENU button.2 Open the [Browser Remote] submenu.[— Wi-Fi Setup] > [1] > [Browser Remote]3 Touch [On].• The URL to enter into the connected network device’s Web browser as well as the camcorder’s SSID(network name) and password will appear. Before launching the device’s Web browser, configure thenetwork device by following the next procedure while referring to the camcorder’s screen.Operating modes:[— Wi-Fi Setup][1][Browser Connection Settings][— Wi-Fi Setup][1][Browser Remote][Off]