White Balance62MenusTable of Contents Index• Using a custom white balance may provide better results in the following cases:- Changing lighting conditions- Close-ups- Subjects in a single color (sky, sea or forest)- Under mercury lamps, certain types of fluorescent lights and LED lights• Depending on the type of fluorescent light, optimal color balance may not be obtained with [¿ Fluorescent]or [ Fluorescent H]. If the color looks unnatural, select [ Automatic] or a custom white balance setting.Remote Operation Using Browser RemoteAfter completing the necessary preparations (A 125), you can change the white balance option remotely from aconnected device using the Browser Remote application.1 Press the white balance button on the Browser Remote screen.To set automatic white balance ( )2 Select .• The selected option will be displayed on the Browser Remote screen and applied on the camcorder.To set a preset white balance option2 Select the desired option.• If you selected [È], continue to the next step to set the color temperature. Otherwise, the selected optionwill be displayed on the Browser Remote screen and applied to the camcorder; you do not need to performthe rest of the procedure.3 Press [5500K] and then selected the desired value from the list.• The selected value will be displayed on the Browser Remote screen and applied on the camcorder.To set custom white balance ([ ] and [ ])2 Point the camcorder at a gray card or white object so it fills the whole screen.3 Select [ ] or [ ].4 Press [Å].• During the procedure, [ ] or [ ] will flash quickly. When it stops flashing, the procedure is completed andthe setting will be applied on the camcorder.
