Preparing the Camcorder22MenusTable of Contents Index4 Hook the viewfinder unit latch under the left side of theLCD panel and then fasten the latch. Then, return theLCD panel to its original position.Adjusting the Viewfinder Unit1 Press the ON/OFF button to turn on the camcorder.• The POWER/CHG indicator will illuminate.• If necessary, perform the initial setup (A 27).2 Adjust the dioptric adjustment lever until the viewfinder unit’simage is sharp.Removing the Viewfinder Unit1 Turn the LCD panel 90 degrees upward.2 Open the viewfinder unit latch and remove the viewfinder unitfrom the camcorder.• Make sure to open the latch all the way before removingthe unit.3 Attach the viewfinder unit cover, hook the viewfinder unitlatch to the left side of the cover and then fasten the latch.Dioptricadjustment lever
