3–11OPERATIONS AND TIMINGCOPYRIGHT © 1998 CANON INC. CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)4. Outputs from the DC Controller PCB (4/5)Figure 3-111DC controller PCBChange solenoid+24VSL1 CHSLD*When '1', the solenoid turns OFF.(blanking shutter width control)When '0', the solenoid turns ON.(lens mount moved)J324B- 7- 8Multifeeder holdingplate solenoid SL2J312B- 7- 8Blanking shuttersolenoid SL3J315A- 8- 7+24VMFSLD* When '0', the solenoid turns ON.(holding plate released)+24VBSSLD* When '0', the solenoid turns ON.(blanking shutter opened)Primary charging rollercleaning solenoid SL4J324A- 8- 7+24VPCLSLD* When '0', the solenoid turns ON.(cleaning pad locked)Transfer charging rollerreleasing solenoid SL5J316- 2- 1+24VTRSLD* When '0', the solenoid turns ON.(transfer roller lowered)Oil application solenoid SL6J324B- 3- 424VSL6D* When '0', the oil applicationsolenoid (SL6) turns ON.(sensor drive)24VPaper deflectingplate solenoid SL 8J320- 5- 424VSL8D* When '0', the paper deflecting platesolenoid (SL8) turns ON.(duplexing unit inlet opened)
