[Report] The history of up to 16 documents printed as setting lists and reports is displayed (upto 128 documents when the SD card is installed).[E-Mail Print] The history of up to 16 e-mails printed after received is displayed (up to 128documents when the SD card is installed).[Job Log] (E-Mail RX)The e-mail reception history shows up to 96 e-mails. If an error occurs during e-mail reception, the applicableerror code is displayed in [RX Results].Error Code Cause Action407The POP3 mail server wasdisconnected. ● Consult your network administrator.● If the error occurs frequently with the same e-maildata, check whether the e-mail data is normal.Data of 1 KB (1024 bytes) couldnot be received within 10minutes during e-mail reception.408The "ERR" response wasreturned from the POP3 mailserver.Consult your network administrator.412Data of 1 KB (1024 bytes) couldnot be received within 10minutes during e-mail reception.● Consult your network administrator.● If the error occurs frequently with the same e-maildata, check whether the e-mail data is normal.420 The e-mail data size exceeds 1.5GB.If the SD card is installed on the machine, the data size ofan e-mail to send must be 1.5 GB or less.421 The e-mail message size exceeds25 MB.If the SD card is installed on the machine, the messagesize of an e-mail to send must be 25 MB or less.422 The size of an attached fileexceeds 100 MB.If the SD card is installed on the machine, the size of eachattached file must be 100 MB or less.423 A received attached file is in anunsupported format.Attached files must be in JPEG or TIFF format. Do notattach any files of other formats to an e-mail to send.424 More than three files areattached. Excessive attached files are not printed.430 The sender of the received e-mail is unknown. Make sure to set a sender before sending e-mails.431A divided e-mail has beenreceived.Take the following action to prevent e-mails from beingsent as a divided e-mail.● Reduce the size of an e-mail to send. (Reduce the e-mail size to be less than the one that causes a dividede-mail.)● Configure the application to prevent e-mails frombeing divided before sending.The received e-mail containsunsupported encoding orcharacter codes.For e-mails to send, use the encoding and character codessupported by the machine. Outline of E-MailPrint(P. 160)The received e-mail is in anunsupported format.Check the e-mail format. We recommend sending e-mailsin text format.432 The received data is invalid. Check whether the data of the sent e-mail is normal.Using Remote UI347
