Configuring SMB0YSF-03SServer Message Block (SMB) is a protocol for sharing resources, such as files and printers, with more than one devicein a network and used to register the machine as a shared printer on the SMB network.● SMB supports only NetBIOS over TCP/IP and does not support NetBEUI. Configure the IP address beforeconfiguring the SMB settings. Setting IP Addresses(P. 190)● SMB is enabled only when the optional SD card is installed in the machine.1 Start the Remote UI and log on in Management Mode. Starting Remote UI(P. 336)2 Click [Settings/Registration].3 Click [Network] [SMB Settings].4 Click [Edit].Network245
