5 Click the [WINS] tab, select [Enable NetBIOS over TCP/IP], and then click [OK].6 Click [OK] until all dialog boxes are closed.● Restart the computer if you are prompted to do so.Installing the Printer DriverInstall the printer driver by following the procedure described in the "Printer Driver Installation Guide".When a port selection screen appears during installation● Follow the procedure below.1 Click [Add Port].2 Select [Network] and click [OK].3 From the list, select "Workgroup Name," "Server Name," and "Printer Name" that werespecified in the SMB protocol settings in this order. Configuring SMB(P. 245)Network249
