Update from the Remote UI.Updating by Connecting This Printer to an Outside NetworkIf the printer is connected to an outside network, you can update to a most recent firmware by linking withthe delivery server.Checking the New Firmware/Specifying the Delivery SettingsYou can check the new firmware that is applicable with the printer and specify the delivery settings.1Start the Remote UI, and then log in as Administrator."e-Manual"2From the top page of the Remote UI, click [Settings/Registration] → [License/Other] →[Register/Update Software].NOTECommunication testTo check that the transmission with the delivery server is properly operating, if necessary, perform acommunication test before installation."Testing Communication Using the Remote UI"IMPORTANTEstimated time required to apply firmwareThe time required to apply the downloaded firmware is approximately 20 minutes. This operation maytake more time depending on the system configuration and network environment of your printer.Updating the Firmware1
