Installing an SD Card0YSF-080This section describes how to mount and initialize an SD card. Insert theSD card into the SD card slot on the left side of the machine. Read theprecautions in Installation(P. 3) before installing the SD card. Note thatthe data in the machine that is stored to the SD card is all subjected toencryption. This ensures safe use of the SD card on a computer or in othersituation because the encrypted data in the SD card is protected againstunauthorized extraction.● Before mounting the SD card, check whether the SD card is write-protected. If the card is write-protected,unlock the card before inserting it.1 Turn OFF the machine, and unplug the power plug from the AC power outlet.● When you turn OFF the power, shut down the machine from the operation panel without using the powerswitch. Turning OFF the Power (Performing a Shutdown)(P. 34)2 Remove the SD card slot cover.1 Use a coin to remove the screws.2 Open the SD card slot cover, and remove it in the direction indicated by the arrow.Appendix633
