Select Feeder Menu0YSF-068The settings about the paper source and the size of paper loaded in the machineare listed with short descriptions. When you press() on the operation panel,the Select Feeder menu is displayed. Default settings are marked with a dagger ().Common settings●The settings are the same as those for in theSetup Menu(P. 363). The settingsspecifiedhere are also applied to the settings.Asterisks (*)●Settings marked with an asterisk (*) are not displayed depending on other settings or whether an optionalpaper feeder is installed in the machine.Paper Source(P. 500)MP Tray Paper Size(P. 500)Drawer N Paper Size (N=1, 2, 3, 4)(P. 501)Standard Paper Size(P. 502)MP Tray Priority(P. 503)MP Tray for Mix Ppr.(P. 503)Auto Select Drawer(P. 503)Auto Detect Ppr Type(P. 504)Default Paper Type(P. 505)MP Tray Paper Type(P. 506)Drawer N Paper Type (N=1, 2, 3, 4)(P. 506)Manual 2-Sided (MP)(P. 506)2-Sided Printing(P. 507)Paper SourceSelect the paper source from which paper is fed. When you want to automatically change the paper source based onthe paper size and paper type, select .AutoMulti-Purpose TrayDrawer 1Drawer 2*Drawer 3*Drawer 4*()Select the paper sourceMP Tray Paper SizeSpecify the size of the paper that is loaded in the multi-purpose tray.Specifying Paper Size and Type in the Multi-Purpose Tray(P. 60)Setting Menu List500
