Setting Up Print Server0YSF-03AWith a print server, you can reduce the load on the computer that you print from. The print server also enables eachcomputer to install printer drivers over the network, which saves you the trouble of installing printer drivers on eachcomputer by using the DVD-ROM. To set up a computer on the network as a print server, configure the settings forsharing the printer.● To perform the following procedure, log on to your computer with an administrator account.● You may be unable to install printer drivers over the network depending on the operating system and the bitarchitecture (32-bit or 64-bit) of the print server and client computers.● When implementing a print server in a domain environment, consult your Network Administrator.To carry out Department ID Management when using a print server● Canon Driver Information Assist Service must be added during the printer driver installation. For moreinformation, see the Printer Driver Installation Guide.1 Open the printer folder. Displaying the Printer Folder(P. 661)2 Right-click your printer icon and click [Printer properties] or [Properties].3 Click the [Sharing] tab, select [Share this printer], and enter the share name of themachine.Network215
