When an Error Message Appears0YSF-06CIf an abnormality occurs in the print processing or the memory is full, or you encounter operation problems, amessage appears on the display. Find out more information about messages in the following list.Auto Continue●If you set to in the setting menu of the operation panel, the printing is continuedwith the error skipped regarding the error messages marked within the list (Auto SkipError(P. 368)). If the error skip causes missing print data or improper printouts, print thefileagain.To cancel printing●When you want to cancel the current printing regardless of the error message, perform a soft reset.SoftReset(P. 498)About ●You can specify settings not to display some messages showing that printing can be continued.ShowWarnings(P. 369)18 Drawer N overload. (N=2 to 4)The paper loaded in the optional paper feeder exceeds the load limit.●Load paper without exceeding the load limit line.Loading Paper in the Paper Drawer(P. 40)1F Output tray is full.Too much paper is on the output tray.●Remove the paper from the output tray.51 Print settings error.Printing data containing an unavailable paper type or width has been attempted.●Press() to cancel the print job since the data is not available for printing.55 SD Card error.An error has occurred in the SD card.●Shut down the machine, remove the SD card, and install it again.Turning ON/OFF the Power(P. 34)Installing an SD Card(P. 633)Troubleshooting519
