Setting a Remote UI PIN0YSF-043You can set a PIN for access to the Remote UI. All users use a common PIN.● When Department ID Management is enabled, setting here is not required. Setting the Department IDManagement(P. 259)1 Press ( ).2 Use / to select , and press .● When a message appears, press .3 Select .4 Select , and press .5 Set a PIN.● Enter up to 7 digits and press .● As PIN> is displayed for confirmation, enter again the same PIN digits.If Remote UI settings are initialized● The Remote UI Access PIN is also initialized. After an initialization, reset the PIN. Initializing Menu(P. 601)LINKSSetting Access Privileges(P. 255)Setting the System Manager Password(P. 256)Security266
