[Pause] */[Resume] *Press [Pause] to temporarily stop the current print job. Press [Resume] to restart the paused print job.● For a secured or encrypted document, clicking [Resume] displays a screen to prompt you to enter the PIN.Enter the correct PIN and click [OK].* Not displayed when is set to in the setting menu of the operation panel ( InterruptPrint(P. 372) ).● The status of all print jobs is displayed regardless of the settings of the Department ID Management.● The factory default settings prevent some operations, such as deleting a document to print orinterrupting a print job, from being performed in General User Mode. If you want to operatedocuments in General User Mode, log on in Management Mode and enable [Allow General User JobOperation]. Enabling End Users to Operate Documents(P. 351)● If you entered your user name when you logged on in General User Mode, your user name will onlybe displayed on the documents that you printed.● Click [Job No.] on the paused documents and secure documents to display detailed information. Youcan check the user name and the page count of the printed document.Checking History of DocumentsThe print history and e-mail reception history are displayed in list form.Log on to the Remote UI ( Starting Remote UI(P. 336) ) [Status Monitor/Cancel] [Job Log][Job Log] (Print)Four types of print history can be displayed.[Print Job/Direct Print] Up to 400 documents printed from computers and USB memory devices are displayed(up to 2,000 documents when the SD card is mounted).[Stored Job] The history of up to 2,000 printed documents stored in the machine is displayed (onlywhen the SD card is installed).Using Remote UI346
