Switching 1-Sided and 2-Sided Printing0YSF-01JYou can make both 1-sided and 2-sided printouts. The default setting is [2-sidedPrinting]. Change the setting as necessary.● 2-sided printing may not be available with some sizes and types of paper. Paper(P. 620)[Basic Settings] tab Select [1-sided Printing] or [2-sided Printing] in [1-sided/2-sided/BookletPrinting] Select the position to bind in [Binding Location] [OK][1-sided/2-sided/Booklet Printing]Select [1-sided Printing] or [2-sided Printing].● For [Booklet Printing], see Printing Booklet(P. 92) .[Binding Location]Specify the position to bind the printouts with a binding tool such as a stapler. Printing orientation will bechanged depending on the specified binding position. To specify the margin width for the binding position,click [Gutter].[Long Edge [Left]] Prints a document in such a way that the printed pages are opened to the left whenbound.Printing a Document84
