Xerox DocuPrint 100 Software Manual

Also see for Docuprint 75: Getting started Software guide Planning guide Supplementary guide Operator's guide

Contents

Xerox DocuPrint 100 Software Manual Manual pdf 297 page image

Specifying print format parametersUsing LCDS Print Description Language 4-57Default NOOUTPUTGRAPHICSparameter: pointsto note• If you are using the IMAGE parameter in conjunction withGRAPHICS, make sure to list the GRAPHICS parameter first,as these two parameters are order dependent.• In Batch mode, only one graphic is imaged per page.• After a graphic has been processed as part of the job, if aswitch to a JDE with GRAPHICS = NO occurs, theGRAPHICS = NO specification is ignored.OUTPUTGRAPHICSparameterexamplesOUTPUT IDFAULTSpecifies the default ink that will be used for objects whose ink isnot specified. This parameter remains in effect until anotherIDFAULT parameter is specified.Syntax OUTPUT IDFAULT = ‘inkref’’Unused options: The following options are ignored by the DP EPS. They are included herefor compatibility.MOVE Specifies that all referenced graphic disk files will be copied into the print file.(On the DP EPS, YES is used instead.)NOSUB If a graphic is missing, specifies that no substitution for the missing graphicimage is desired. (This option is ignored by the DP EPS.)Table 4-56. OUTPUT GRAPHICS parameter options and definitions (Continued)Option DefinitionOUTPUT GRAPHICS=BATCH, RESOLUTION=300;OUTPUT GRAPHICS=MOVE, RESOLUTION=300,PURGE=NO;