Specifying print format parametersUsing LCDS Print Description Language 4-35LINE PCCTYPEparameter: pointsto note• For the DP EPS, this parameter is treated as if the systemwere an IBM 3211.Note that there is no functional difference between IBM3211and IBM4245 for PCC types.• Creation of a user defined PCC table, which may bereferenced by either an identifier id or the keyword USER, isspecified using the PCC command. (Refer to “PCCcommand,” later in this chapter.)• The INITIAL parameter for any of the PCCTYPEs listed in theprevious table (except ANSI or HOST=RSX11) is TOF.For ANSI or HOST=RSX11, the INITIAL parameter is BOF.For USER or PCCid, the INITIAL parameter is set by the userin the PCC command.• The PCCTYPE=IBM3211 or IBM4245 specifies that theprinter online interface will perform checks, such as for bad orNO OP parameters.LINE VFUSpecifies a vertical format unit (VFU) table.Syntax LINE VFU = {vfuid | NONE}OptionsDefault NONETable 4-38. LINE VFU parameter options and definitionsOption Definitionvfuid vertical format unit identifier.The command identifier of the VFU table, which must precede this reference toit. The VFU table defines print line positions corresponding to skip to channelparameters for the job to be processed.NONE Indicates that any skip to channel parameter is to be replaced by a carriagecontrol of Print and Space 1.
