Specifying print format parametersUsing LCDS Print Description Language 4-5ABNORMAL IMISMATCHSpecifies the action for a highlight color printer to take when aspecified ink requires a primary ink color that is not currentlyloaded.NOTE: IMISMATCH is a highlight color parameter that isrecognized by printers such as the Xerox 4850 and 4890. It maybe included in JSLs that are created on the DP EPS for highlightcolor printing. If the system encounters this parameter whenprinting, it is ignored.Syntax ABNORMAL IMISMATCH = {ABORT | CONTINUE | STOP}OptionsDefault STOPABNORMALIMISMATCHparameter: pointto noteIf a report does not contain an ink list in the JDE, printing maystart before the system is aware of the primary colors that areneeded. For example, page 100 of a report that was designatedblack only may specify the green primary when the ink loaded inthe printer is red. This would create an IMISMATCH condition.Table 4-6. ABNORMAL IMISMATCH parameter options and definitionsOption DefinitionABORT Specifies that the system displays a message for the abnormal conditionand aborts only the report it is processing (not the entire job) withoutoffering the operator the choice of resuming printing or canceling the job.CONTINUE Specifies that the system displays a message defining the abnormalcondition and resumes printing the current report with the ink that iscurrently loaded, overriding the ISUBSTITUTE parameter and any formscreation commands that specify no ink substitution.STOP Specifies that the system displays a message prompting the operator toload the requested primary ink or to abort the job. The printer stopsprinting the report and waits for the operator to resume printing (with orwithout changing inks) or cancel the job.
