About extra optical zoom/extra zoomAmong approx. 1.3 megapixel image capture area of the MOS image sensor, the central part of approx. 0.31megapixels is extracted for shooting. That enables the shooting with a higher zooming effect. When the imagecapture size at “VGA” is applied, the zoom factor can be adjusted up to 36xSW395SW395SC385SC385SC384SC384 /72xSW396SW396SC386SC386/2xSW175SW175SW174WSW174WSW172SW172ST165ST165ST162ST162 .[Digital zoom]Select the digital zoom setting from the following.• On (Max X16)SW175SW175SW174WSW174WSW172SW172ST165ST165ST162ST162 : Images can be zoomed in on with the extrazoom (1x - 2x) and the electronic zoom (higher zoom factors, up to 16x).• On (Max X288)SC384SC384 : Images can be zoomed in on with the optical zoom (1x - 18x), extra optical zoom(up to 36x) and the electronic zoom (higher zoom factors, up to 288x).• On (Max X432)SW395SW395SC385SC385 : Images can be zoomed in on with the optical zoom (1x - 18x), extraoptical zoom (up to 36x) and the electronic zoom (higher zoom factors, up to 432x).• On (Max X864)SW396SW396SC386SC386 : Images can be zoomed in on with the optical zoom (1x - 36x), extraoptical zoom (up to 72x) and the electronic zoom (higher zoom factors, up to 864x).• Off: Does not use the digital zoom.• Default: OffNoteSW175SW175SW174WSW174WSW172SW172ST165ST165ST162ST162:• When “On (Max X16)” is selected, digital zooming will stop when the zoom factor has reached 2x.• When the zoom factor is 2x or more, the setting of the preset positions will become unavailable.SC384SC384:• When “On (Max X288)” is selected, digital zooming will stop when the zoom factor has reached 36x.• When the zoom factor is 36x or more, the setting of the preset positions will become unavailable.SW395SW395SC385SC385:• When “On (Max X432)” is selected, digital zooming will stop when the zoom factor has reached 36x.• When the zoom factor is 36x or more, the setting of the preset positions will become unavailable.SW396SW396SC386SC386:• When “On (Max X864)” is selected, digital zooming will stop when the zoom factor has reached 72x.• When the zoom factor is 72x or more, the setting of the preset positions will become unavailable.[Pan-Tilt degree/Zoom ratio display]SW395SW395SC385SC385SC384SC384SW175SW175SW174WSW174WSW172SW172ST165ST165ST162ST162Select “On” or “Off” to determine whether or not to display the current panning/tilting degree and the zoom ratiodisplay on images when the camera is being operated manually.• On: Displays the current panning/tilting degree and the zoom ratio display.• Off: Does not display the current panning/tilting degree and the zoom ratio display.• Default: OnNote• When “On” is selected, the panning/tilting degree and the zoom factor will be displayed at the positionselected for “OSD position” on the [Basic] tab of the “Basic” page. (®page 55)[Camera position display]SW396SW396SC386SC386When operating the camera manually, you can select what information to display in the image from thefollowing.• Off: Information is not displayed in the image.• Pan-Tilt degree/Zoom ratio display: The Pan-Tilt degree/Zoom ratio display is displayed.• Direction display: Direction display is displayed.• Default: Pan-Tilt degree/Zoom ratio display96 Operating Instructions11 Configure the settings relating to images and audio [Image/Audio]
