SD memory card[SD memory card]Select “Use” or “Not use” to determine whether or not to use the SD memory card.• Default: UseIMPORTANT• Select “Not use” when operating without an SD memory card.• When the setting is changed between “Use” and “Not use” while another user is during operation, theoperation will be canceled.• After inserting the SD memory card, it is necessary to select “Use” to use the SD memory card.• When playing or downloading images saved on the SD memory card, it is necessary to select “On” for“Save logs” on the [Log] tab (®page 73) in advance.• When the image refresh interval is short, notification/recording timing or interval may become incorrect.Notification/recording may also not be performed correctly as configured when multiple users arereceiving images. In this case, set the refresh interval longer.• There are limited times to overwrite on an SD memory card. When having a high frequency ofoverwriting, the lifetime of the SD memory card may become shorter.• A lifetime of an SD memory card should be influenced by the number of the image files stored and logsavings on the SD memory card. Selecting H.264 for “Recording format” can reduce the number offiles to be stored on the SD memory card.• The data writing speed will go down after data are repeatedly written down on an SD memory card.SW396SW396SW395SW395SC386SC386SC385SC385SC384SC384:• Before removing the SD memory card from the camera, it is necessary to select “Not use” first.SW175SW175SW172SW172ST165ST165ST162ST162:• To remove the SD memory card, press the FUNCTION button and remove the SD memory card afterthe FUNCTION indicator turns off.• Refer to the installation guide for further information about inserting and removing an SD memory cardfrom the camera.[Recording format]Select “JPEG” or “H.264” for the video encoding format of image data to be recorded on the SD memory card.• JPEG: Records still image data.• H.264: Records video data in the MP4 video encoding format. Audio will not be recorded.• Default: JPEGNote• When “H.264” is selected, it will become impossible to transmit images with the settings of MPEG-4 orH. 264(2).• When “H.264” is selected, the settings for “H.264(2)” on the [JPEG/H.264] tab of the “Image/Audio”page will be changed to the settings for “H.264 recording”.• When the setting value of “Video encoding format” on the [JPEG/H.264] tab of the “Image/Audio” pageis changed from “H.264” to “MPEG-4”, the setting value of “Recording format” will automatically bechanged to “JPEG”.• When “H.264” is selected, the priority band may not be maintained if “H.264/MPEG-4(2)” is selectedfor “Priority stream” - “Stream type” on the [System] tab of the “User mng.” page.• When using the SD memory recording function of a Panasonic network disk recorder, select “JPEG”for “Recording format”.• When the setting of “Recording format” is changed between “JPEG” and “H.264”, format the SDmemory card. (®page 63)• Due to the difference in file formats, the indication of remaining capacity of the SD memory card differsbetween the cases when “JPEG” is selected and when “H.264” is selected for “Recording format”.Operating Instructions 5910 Configure the basic settings of the camera [Basic]
