Panasonic WV-SW175 Operating Instructions Manual

Also see for WV-SC384: Integration note Product catalog Installation guide Operating instructions Specifications

Contents

Panasonic WV-SW175 Operating Instructions Manual Manual pdf 161 page image

16 Configure the settings of the servers[Server]The settings relating to the mail server, the FTP server and the NTP server can be configured on this page.The “Server” page has 3 tabs; the [Mail] tab, the [FTP] tab and the [NTP] tab.16.1 Configure the settings relating to the mail server[Mail]Click the [Mail] tab on the “Server” page. (®page 47, page 49)The settings relating to the mail server used to send the alarm mail can be configured on this page.IMPORTANT• When a terminal that receives e-mails is not compatible with UTF-8 encode, it is impossible to receivealarm mails correctly.[SMTP server address]Enter the IP address or the host name of the SMTP server used to send e-mails.• Available number of characters: 1 - 128 characters• Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and thehyphen (-).[SMTP port]Enter the port number to which e-mails are sent.• Available port number: 1-65535• Default: 25The following port numbers are unavailable since they are already in use.20, 21, 23, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 995, 10669, 10670[POP server address]When “POP before SMTP” is selected for “Type”, enter the IP address or the host name of the POP server.• Available number of characters: 1 - 128 characters• Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and thehyphen (-).Operating Instructions 16116 Configure the settings of the servers [Server]