Advanced setting[Zoom with auto track]Select the tracking zoom control from the following.Off: Zoom control is not performed.On(Continuous): Zoom control is performed.Default: On(Continuous)[Object size]Select an object size from the following.Small(1/4 of the image): The tracking target is enlarged to about 1/4 the size (lengthwise) of the monitorscreen.Middle(1/2 of the image): The tracking target is enlarged to about 1/2 the size (lengthwise) of the monitorscreen.Large(3/4 of the image): The tracking target is enlarged to about 3/4 the size (lengthwise) of the monitorscreen.Default: Small(1/4 of the image)Note• The sizes described here are only a guide. Depending on the environment conditions and the trackingconditions the displayed size may be different from the expected size.• Increasing the display size of the tracking target reduces the tracking capabilities.[Sensitivity]Select the tracking sensitivity from the following.High/Middle/LowDefault: MiddleNote• Reducing the sensitivity can help reduce false detections such as when a tree is swaying, but it willalso reduce the tracking capabilities. On the other hand, increasing the sensitivity increases the trackingcapabilities but also increases false detections. Match the settings according to where the camera isused.[Auto track duration time]Select the time that tracking will be forced to stop from after it started from the following.Off(Unlimited)/10s/20s/30s/40s/50s/1min/2min/3min/5min/10minDefault: Off(Unlimited)Note• The camera will stop in the position it is at when the auto track duration time expires. To return to automode, set the self return, and after tracking is finished, the self return time is counted and the camerareturns to auto mode.[Lost object search]Select the operations to be performed when the tracking loses the target from the following.Off: Tracking stops at the position that it lost the target.On(w/o zoom-out): If the target is lost, tracking starts looking for new movement and if it finds movement itcontinues auto tracking.On(w/zoom-out): If the target is lost, the camera zooms out and tracking starts looking for new movement, ifit finds movement it continues auto tracking.Default: On(w/zoom-out)Operating Instructions 12311 Configure the settings relating to images and audio [Image/Audio]
