1 Monitor images on a PCThe following are descriptions of how to monitor images from the camera on a PC.1.1 Monitor images from a single cameraNote• SW175/SW174W/SW172/ST165/ST162 do not support MPEG-4.1. Start up the web browser.2. Enter the IP address designated using the Panasonic “IP Setting Software” in the address box of thebrowser.• Example when entering an IPv4 address: http://URL registered using IPv4 addresshttp://192.168.0.10/• Example when entering an IPv6 address: http://[URL registered using IPv6 address]http://[2001:db8::10]/IMPORTANT• When the HTTP port number is changed from “80”, enter “http://IP address of the camera + : (colon)+ port number” in the address box of the browser. (Example: http://192.168.0.11:8080)• When the PC is in a local network, configure the proxy server setting of the web browser (under[Internet Options...] under [Tools] of the menu bar) to bypass the proxy server for the local address.Note• Refer to page 181 for further information about the case in which “HTTPS” is selected for“HTTPS” - “Connection” on the [Network] tab of the “Network” page (®page 166).3. Press the [Enter] key on the keyboard.SW396SW396SW395SW395SC386SC386SC385SC385SC384SC384:When “On” is selected for “User auth.”, the authentication window will be displayed before displaying liveimages. Enter the user name and password. The default user name and password are as follows.User name: adminPassword: 12345SW175SW175SW174WSW174WSW172SW172ST165ST165ST162ST162:The authentication window will be displayed before displaying live images. Enter the user name andpassword. The default user name and password are as follows.User name: adminOperating Instructions 91 Monitor images on a PC
