• It is impossible to transmit/receive audio using a cellular phone.• Depending on the cellular phone in use, larger size images may not be displayed. In this case, selecting“9 Low” for “Image quality setting” of “JPEG” (®page 80) may sometimes solve this problem.• Depending on the cellular phone in use or its contract plan, it may be impossible to access.*1 IP address is the global WAN IP address of the router that can be accessed via the Internet.*2 Only displayed for users whose access level is “1. Administrator” or “2. Camera control” when “On” is selected for “User auth.”.(®page 156)2.2 Monitor images on a mobile terminalIt is possible to connect to the camera using a mobile terminal and monitor images (MJPEG only) from thecamera on the screen of the mobile terminal. Images are automatically refreshed to display the latest image.Operations such as pan/tilt/zoom can also be performed.The compatible mobile terminals are shown as follows. (As of August, 2011)– iPad, iPhone, iPod touch (iOS 4.2.1 or later)– Android™ mobile terminalsOnly JPEG images can be viewed from standard Android mobile terminal browsers.For further information about compatible devices, refer to our website(http://panasonic.net/pss/security/support/info.html).IMPORTANT• When the authentication window is displayed, enter the user name and password. The default username and password are as follows.User name: adminPassword: 12345To enhance the security, change the password for the user “admin”. (®page 156)Note• To view the camera images from a mobile terminal, network settings needed in order to connect to theInternet must be set in advance. (®page 166)Operating Instructions 232 Monitor images on a cellular phone/mobile terminal
