Note• This function is also useful to automatically set the camera in a specific mode when the power of thecamera is turned on.• The self return function works even when the setup menu is displayed.[Self return time]Select a waiting time (amount of time until the camera starts the selected operation after the end of the manualoperations) from the following.10s/ 20s/ 30s/ 1min/ 2min/ 3min/ 5min/ 10min/ 20min/ 30min/ 60min• Default: 1min[Image hold]Select “On” or “Off” to determine whether or not to hold the still image on the screen (that is displayed at thelast moment before the camera started to move to a preset position) until the camera has moved to the presetposition.• On: A still image will be held on the screen until the camera has moved to the preset position.• Off: Images from the camera will be displayed even when the camera is moving to the preset position.• Default: Off[Upside-down]SW396SW396SC386SC386Select “On” or “Off” to determine whether or not to turn the image upside-down.• On: The image is turned upside-down.• Off: The image is not turned upside-down.• Default: OffIMPORTANT• Only use the upside-down function to check the image before installing the camera. Set this functionto “Off” after installing the camera.[Upside-down]SW395SW395SC385SC385Select “On (desktop)” or “Off (ceiling)” to determine how the camera is to be installed.• On (desktop): Select this when the camera is to be installed with the dome side up.• Off (ceiling): Select this when the camera is to be installed with the dome side down.• Default: Off (ceiling)[Extra optical zoom]/[Extra zoom]Select the extra optical zoom or extra zoom setting from the following.•SW395SW395SC385SC385SC384SC384On (Max X36): Images can be zoomed in on with the optical zoom (1x - 18x) and the extra optical zoom(higher zoom factors, up to 36x).Off (Max X18): Does not use the extra optical zoom.Default: On (Max X36)•SW396SW396SC386SC386On (Max X72): Images can be zoomed in on with the optical zoom (1x - 36x) and the extra optical zoom(higher zoom factors, up to 72x).Off (Max X36): Does not use the extra optical zoom.Default: On (Max X72)•SW175SW175SW174WSW174WSW172SW172ST165ST165ST162ST162On (Max X2): Images can be zoomed in on with the extra zoom (1x - 2x).Off: Does not use the extra zoom.Default: On (Max X2)Operating Instructions 9511 Configure the settings relating to images and audio [Image/Audio]
