[Image quality]Select the quality for H.264 images to be recorded from the following.Low(Motion priority)/ Normal/ Fine(Image quality priority)• Default: NormalNote• When “Constant bit rate” is selected for “Recording priority”, this setting is available.[Refresh interval]Select an interval (I-frame interval; 0.2 - 1 second) to refresh the H.264 images to be recorded from thefollowing.0.2s/ 0.25s/ 0.33s/ 0.5s/ 1s• Default: 1sSD memory card information[Remaining capacity]Total capacity and remaining capacity of the SD memory card will be displayed.Depending on the status of the SD memory card, the size indications will differ as follows.Indication Description--------KB/--------KB No SD memory card is inserted. Failed to obtain available capacitydue to error, etc.********KB/********KB The SD memory card is unformatted, or locked, etc.Note• When “Off” is selected for “Overwrite” and the available size of the SD memory card has reached “0KB”, images will not be saved on the SD memory card. When the notification function is on, a notificationmail will be sent to the registered addresses when the SD memory card becomes full. (®page 147,page 148)[Format]To format the SD memory card, click the [Execute] button.IMPORTANT• Before formatting the SD memory card, it is necessary to select “Use” for “SD memory card” on the[SD memory card] tab of the “Basic” page (®page 58) and “Off” for “FTP periodic imagetransmission” on the [FTP img. trans.] tab of the “Network” page (®page 197).• Use the SD memory card after formatting it using the [SD memory card] tab. If using the SD memorycard that has not been formatted on the [SD memory card] tab, the following functions may not workcorrectly.– Save/obtain images that failed to transmit to the FTP server using the FTP periodic imagetransmission function– Save/obtain alarm images– Save/obtain images saved manually– Save/obtain images in accordance with the schedule settings– Save/obtain the alarm logs, the manual/schedule logs, the FTP error logs and the system logs– Save/obtain images recorded using the SD memory recording function of Panasonic network diskrecorder– Play/download images on the SD memory cardOperating Instructions 6310 Configure the basic settings of the camera [Basic]
