Panasonic WJ-DR200 Operating Instructions Manual

Also see for WJDR200 - DIGITAL VIDEO RECORD: Operating instructions User guide

Panasonic WJ-DR200 Operating Instructions Manual Manual pdf 26 page image

-24- Auto Start SetupThis item lets you enable or disable automatic TimeLapse Recording, when the Disc Recorder’s power isturned on.1. Move the cursor to the AUTO START parameter inthe TIME LAPSE menu by pressing the orbutton.2. Select either ON or OFF by pressing the orbutton.ON: Enables automatic Time Lapse Recording auto-matically.Note: This mode is valid only when START UPSTATUS in the SYSTEM menu is set to MAN-UAL.OFF: Disables automatic Time Lapse Recording.T/L PROG. TIMER: Enables Time Lapse ProgramTimer recording.Note: T/L PROG.TIMER mode is available onlywhen the PROGRAM TIMER parameter inthe ALARM RECORD menu is set to OFF.The default setting is OFF.3. If you select T/L PROG.TIMER in step 2 above, youneed to make some settings in the associated sub-menu.Refer to Time Lapse Program Timer Setup on page25 for details.3. Manual Time Lapse Alarm RecordingMenuThis menu lets you set the parameters for Manual TimeLapse Recording in response to an alarm input.1. Move the cursor to the MANUAL REC ALARM para-meter in the TIME LAPSE menu by pressing theor button.2. Select ON by pressing the or button, thenpress the SET button. The MANUAL REC ALARMmenu shown below appears.MANUAL REC ALARMVIDEO PIXEL 720 *480/3DIM ON(720 *480/3DIM ON)VIDEO QUALITY FINE(FINE)AUDIO RECORD OFF(OFF)CAPTURE RATE 0.20 sec(0.20 sec)• Post Recording PatternThis item is available only if the CAMERA INPUTparameter in the VIDEO INPUT menu is set to A+B(CAMERA ID OFF).It lets you select recording of pre and post-framesfrom input A and/or B when there is sensor inputfrom the SENSOR IN terminal.1. Move the cursor to the POST REC PATTERNparameter in the TIME LAPSE menu by pressingthe or button.2. Select the desired recording input for postframes by pressing the or button.AA: Records input A for post-frames.BB: Records input B for post-frames.AB: Records input A and B for post-frames. Manual Time Lapse Alarm Recording SetupThis item lets you enable or disable Manual Time LapseRecording in response to an alarm input.1. Move the cursor to the MANUAL REC ALARM para-meter in the TIME LAPSE menu by pressing theor button.2. Select either ON or OFF by pressing the orbutton.ON: Enables Time Lapse Alarm Recording.OFF: Disables Time Lapse Alarm Recording.The default setting is OFF.3. If you select ON mode in step 2, you need to makesettings in the associated submenus.Refer to the Manual Time Lapse Alarm Recordingmenu on page 24 for details. Record Partition SetupThis item lets you specify the minimum number ofrecord partitions for the case that the entire disc spaceis used up in Time Lapse Recording.This function is designed to make it easier to search forrecorded pictures.1. Move the cursor to the RECORD PARTITION para-meter in the TIME LAPSE menu by pressing theor button.2. Select the from 20 to 150 shots by pressing theor button.The default setting is 80.