Panasonic WJ-DR200 Operating Instructions Manual

Also see for WJDR200 - DIGITAL VIDEO RECORD: Operating instructions User guide

Panasonic WJ-DR200 Operating Instructions Manual Manual pdf 23 page image

AUDIO OFF-21-MULTI SHOT(MODE1)CAPTURE RATE 0.20 secRECORD FRAMES 2 ( 0.4sec)PRE/POST FRAMES 0 /2REC PATTERN -SENSOR REC SAME AS ALARMPRE/POST FRAMES -POST REC PATTERN - Capture RateThis item lets you specify the interval (seconds) forrecording of multiple freeze pictures.1. Move the cursor to the CAPTURE RATE parameterin the MULTI SHOT menu by pressing the orbutton.2. Select the desired interval by pressing the orbutton.The following intervals are available depending onthe selected pixel number.720 * 480: 0.07, 0.10, 0.17, 0.20, 0.33, 0.50, 1.0,2.0, 3.0720 * 240: 0.03, 0.07, 0.10, 0.17, 0.20, 0.33, 0.50,1.0, 2.0, 3.0The default setting is 0.20 sec. Recording FramesThis item lets you select the number of frames that arerecorded as freeze pictures on the disc.The maximum number of frames varies depending onthe selected capture rate as shown below.If you set the CAPTURE MODE parameter to MULTISHOT or TIME LAPSE, make the necessary settingsin the respective submenus shown on the followingpages.Refer to the Multi Shot menu on page 21 or TimeLapse menu on page 22 for details. Endless Recording SetupThis item lets you enable or disable uninterruptedrecording when the disc space is used up.This function conforms to REC MODE 1 and is not avail-able in REC MODE 2.1. Move the cursor to the ENDLESS parameter in theREC MODE menu by pressing the or but-ton.2. Select either ON or OFF by pressing the orbutton.ON: Continues recording when the disc is full byoverwriting the oldest data.OFF: Stops recording when the disc is full.The default setting is OFF.1. Multi Shot Recording SetupThis menu lets you make the necessary settings forMulti Shot Recording.1. Move the cursor to the CAPTURE MODE parameterin the REC MODE menu by pressing the orbutton.2. Select MULTI SHOT * by pressing the orbutton, then press the SET button. The MULTISHOT menu shown below appears on the monitorscreen.3. Move the cursor to the parameters by pressing theor button, then select the desired mode bypressing or button.1. Move the cursor to the RECORD FRAME parameterin the MULTI SHOT menu by pressing the orbutton.2. Select the desired number of frames by pressingthe or button.The default setting is 2.Maximum number of Multi Shots0.030.070.100.170.200.330.50123Pixel number 720 x 480AUDIO ONFINE NORMAL ROUGH FINE NORMAL ROUGHAUDIO OFF99 150 230 102 157 24799 150 23096 144 21696 144 21693 138 20391 133 19286 123 17375 102 13368 89 1110.030.070.100.170.200.330.50123Pixel number 720 x 240AUDIO ONFINE NORMAL ROUGH FINE NORMAL ROUGH182 288 384182 288 384182 288 384182 288 384173 266 346173 266 346165 247 314157 230 288144 203 247115 150 17399 123 138