Panasonic WJ-DR200 Operating Instructions Manual

Also see for WJDR200 - DIGITAL VIDEO RECORD: Operating instructions User guide

Panasonic WJ-DR200 Operating Instructions Manual Manual pdf 27 page image

-25- Capture RateThis item lets you specify the interval (seconds) forrecording of multiple freeze pictures.1. Move the cursor to the CAPTURE RATE parameterin the MANUAL REC ALARM menu by pressing theor button.2. Select the desired interval by pressing the orbutton.The following intervals are available depending onthe selected pixel number.720 * 480: 0.07, 0.10, 0.17, 0.20, 0.33, 0.50, 1.0,2.0, ····· 30.0720 * 240: 0.03, 0.07, 0.10, 0.17, 0.20, 0.33, 0.50,1.0, 2.0, ····· 30.0The default setting is 0.20 sec.4. Time Lapse Program Timer SetupThis menu lets you change the parameters of TimeLapse Program Timer recording.1. Move the cursor to the AUTO START parameter inthe TIME LAPSE menu by pressing the orbutton.2. Select T/L PROG.TIMER by pressing the orbutton, then press the SET button. The TIME LAPSEPROGRAM TIMER menu shown below appears onthe monitor screen.TIME LAPSE PROGRAM TIMERSTART ENDSun: OFF --:-- - --:--Mon: OFF --:-- - --:--Tue: OFF --:-- - --:--Wed: OFF --:-- - --:--Thu: OFF --:-- - --:--Fri: OFF --:-- - --:--Sat: OFF --:-- - --:--Daily OFF --:-- - --:-- Video Pixels (Resolution) SetupThis item lets you select the pixel number (number ofhorizontal x vertical picture elements) or resolution ofthe video picture.1. Move the cursor to the VIDEO PIXEL parameter inthe MANUAL REC ALARM menu by pressing theor button.2. Select the desired mode by pressing the orbutton.720 * 480/3DIM ON: High resolution non-blur pic-ture720 * 480/3DIM OFF: High resolution picture720 * 240: Lower resolution, but higher numberof frames.The default setting is 720 * 480/3DIM ON.Note: The parameter 720 * 240 is fixed if the A(CAMERA ID ON) is selected for the CAMERAINPUT parameter in the VIDEO INPUT menu. Video Quality (Compression Rate) SetupThis item lets you set the quality of the video picture byselecting a compression rate.1. Move the cursor to the VIDEO QUALITY parameterin the MANUAL REC ALARM menu by pressing theor button.2. Select the desired mode by pressing the orbutton.FINE: For enhanced sharpnessNORMAL: For normal picture qualityROUGH: For lower picture qualityThe default setting is FINE. Audio Recording SetupThis item lets you enable or disable audio recording.1. Move the cursor to the AUDIO RECORD parameterin the MANUAL REC ALARM menu by pressing theor button.2. Select either ON or OFF by pressing the orbutton.ON: Enables audio recording.OFF: Disables audio recording.The default setting is OFF.3. Move the cursor to the desired day of the week bypressing the or button.Sun-Sat: For setting the recording start and endtime separately for each day of the week.Daily: For setting a uniform recording start and endtime for all days of the week.