Panasonic WJ-DR200 Operating Instructions Manual

Also see for WJDR200 - DIGITAL VIDEO RECORD: Operating instructions User guide

Panasonic WJ-DR200 Operating Instructions Manual Manual pdf 18 page image

-16- SET UP MenuThis menu lets you change the setup or register an upto 8-character password that will allow you access tothe setup menu.MAINSET UP ENABLESYSTEM *REC MODE MODE1 *MODE2 *ALARM RECORD *SEARCH/PLAY *SYSTEM INFO *Panasonic AV Disc Recorder V1.0R001. Move the cursor to the SET UP parameter in theMAIN Menu by pressing the or button.2. Select ENABLE or PASSWORD by pressing theor button. The default setting is DISABLE.3. Select ENABLE for making changes in the setupmenu, or select PASSWORD for registering a pass-word.Refer to Password Setup on page 31 for details. System MenuMAINSET UP ENABLESYSTEM *REC MODE MODE1 *MODE2 *ALARM RECORD *SEARCH/PLAY *SYSTEM INFO *Panasonic AV Disc Recorder V1.0R00Select SYSTEM from the MAIN menu by pressing theor button, then press the SET button. The SYS-TEM menu appears on the monitor screen.As shown below, the SYSTEM menu allows access to 11items.SYSTEMCLOCK * AUG 1.98 0:00START UP STATUS MANUALSERIAL SET UP *VIDEO INPUT *STATUS DISPLAY ONALARM DISPLAY ONDISPLAY POSITION *SERIES REC MASTERSERIES REC OUT CLOSE ↓DISC LED FUNCTION FULLBUZZER ONTo select an item or parameter in the SYSTEM menu:1. Move the cursor to the desired item or parameter bypressing the or button.2. Press the or button to select the desiredparameter.3. Press the SET button to execute the selection ordisplay a submenu for an item with the (*) mark.4. Press the SET UP/ESC button to return to the MAINmenu, if desired. Clock SetupThis item lets you set the current time and date.1. Move the cursor to CLOCK in the SYSTEM menu bypressing the or button, then press the SETbutton to move the cursor to the editing area.2. Move the cursor to the area you want to edit bypressing the or button, then select themonth or number by pressing the (+) or (–) button.Notes:• Valid years are from 1998 to 2096. Set the lasttwo digits for the year. For the year 2000, set“00”.• Set two digits for the hours (military time).3. After finishing the setting, press the SET UP/ESCbutton to move the cursor to CLOCK.Note: The date and time are updated when the SETUP/ESC button is pressed. Start Up Status SetupThis item lets you select the start-up mode of the DiscRecorder when the power is turned on.1. Move the cursor to the START UP STATUS parame-ter in the SYSTEM menu by pressing the orbutton.