Panasonic WJ-DR200 Operating Instructions Manual

Also see for WJDR200 - DIGITAL VIDEO RECORD: Operating instructions User guide

Panasonic WJ-DR200 Operating Instructions Manual Manual pdf 22 page image

-20-To change a parameter in the REC MODE menu:1. Move the cursor to the desired item parameter bypressing the or button.2. Select the desired parameter by pressing the orbutton.3. Press the SET UP/ESC button to return to the MAINmenu, if desired. Video Pixels (Resolution) SetupThis item lets you select the pixel number (number ofhorizontal x vertical picture elements) or resolution ofthe video picture.1. Move the cursor to the VIDEO PIXEL parameter inthe REC MODE menu by pressing the orbutton.2. Select the desired mode by pressing the orbutton.720 * 480/3DIM ON: High resolution none-blurpicture.720 * 480/3DIM OFF: High resolution picture720 * 240: Lower resolution, but higher numberof frames.The default setting is 720 * 480/3DIM ON.The parameter is fixed at 720 * 240 when the CAM-ERA INPUT parameter in the VIDEO INPUT menu isset to A (CAMERA ID ON). Video Quality (Compression Rate) SetupThis item lets you set the quality of the video picture byselecting a compression rate.1. Move the cursor to the VIDEO QUALITY parameterin the REC MODE menu by pressing the orbutton.2. Select the desired mode by pressing the orbutton.FINE: For enhanced sharpnessNORMAL: For normal picture qualityROUGH: For lower picture qualityThe default setting is FINE. Audio Recording SetupThis item lets you enable or disable audio recording.Audio recording is available depending on the selectedrecording mode as shown below.AA BRecording start Recording endMulti ShotTime LapseRecording (A)Single ShotRecording (A)Single ShotRecording(A+B)1stshot2ndshotLastshotContinuous recording4-second recording4-second recordingThe REC MODE 1 or REC MODE 2 menu shownbelow appears on the monitor screen.REC MODE1VIDEO PIXEL 720 *480/3DIM ONVIDEO QUALITY FINEAUDIO RECORD OFFCAPTURE MODE SINGLE SHOTENDLESS OFFAudio recording is disabled in Multi Shot and TimeLapse Recording mode when the CAMERA INPUT para-meter in the VIDEO INPUT menu is set to A+B.1. Move the cursor to the AUDIO RECORD parameterin the REC MODE menu by pressing the orbutton.2. Select either ON or OFF by pressing the orbutton.ON: Enables audio recording.OFF: Disables audio recording.The default setting is ON. Capture Mode SetupThis item lets you select the mode for recording on thedisc.1. Move the cursor to the CAPTURE MODE parameterin the REC MODE menu by pressing the orbutton.2. Select the desired mode by pressing the orbutton.SINGLE SHOT: For Single Shot recording.MULTI SHOT * : For Multi Shot recording.TIME LAPSE * : For Time Lapse recording.The default setting is SINGLE SHOT.