● For , first select the paper source and then adjust the print position.Print position adjustment for 2-sided printing● and allow you to adjust the print position on the first page (frontside). The print position on the second page (back side) will be adjusted based on the values set for eachpaper source.An example of print position adjustmentFirst page (front side) setting valueSecond page (back side) setting value6 Set a value, and press .● Based on the printout made by Printing Position Adjustment Print, use / to enter a value.● When is specified, the print position is adjusted by the input values for all paper sources.● To adjust another position or paper source, repeat steps 5 and 6.7 Press ( ).➠ The screen returns to the main screen.8 Press ( ) again.➠ The machine becomes online.9 Perform the Printing Position Adjustment Print, and check the adjusted printposition on the printout. Step 1: Printing the Current Print Position(P. 582)Adjusting all print positionsYou can use and in the setting menu of the operation panel to adjust the print positionsfor all types of printing regardless of the paper source. You can adjust the print position in the range of -50.0 to+50.0 mm in 0.5 mm increments in either direction: vertical and horizontal. Offset Y/Offset X(P. 398)Maintenance585
