(Display only)Configuration PageYou can check the machine settings ( Setup Menu(P. 363) ) configured in the machine. You can also check otherinformation including the amount of remaining toner, the number of printed pages, and the capacity of the memory(RAM) mounted on the machine. Configuration Page(P. 586)Network Status PrintSelect to print a list of the settings ( Network(P. 378) ) about the network configured in the machine. You can alsocheck the information about the security including the address filter settings and IPSec settings. Network StatusPrint(P. 586)Consmbl. Status Prt.The information such as toner remaining amount, warning messages, and information on where you can purchasenew toner cartridges is printed out. Consmbl. Status Prt.(P. 587)IPSec Policy ListSelect to print a list of the IPSec policy names and settings ( Configuring IPSec Settings(P. 301) ) configured in themachine. IPSec Policy List(P. 587)CalibrationWhen color mismatch occurs or when the colors have changed and the data is not printed in the correct colors(specified colors), you can perform calibration. Correcting Color Mismatch and Hues(P. 579)Color Mismatch Corr.Print color mismatch refers to a shift in the positions of colors that may occur when printing one image withmultiple toner cartridges. When color mismatch occurs, correction can be made by adjusting the print startpositions of the respective colorsDensity ControlWhen the colors have changed and the data is not printed in the correct colors (specified colors), correction canbe made by density control for the respective colors.Full CalibrationPerforms both and simultaneously.PCL UtilitySelect to print a list of the internal information items registered in the machine for use of the PCL mode.Font ListSelect to print a list of the fonts that can be used in the PCL mode. PCL Font List(P. 590)Setting Menu List492
