● Changing the paper type or environmental conditions may solve the problem of toner coming offwithout necessity of changing the settings.Incr Tail End FixingIf only the tail end of the printed image is too dark due to insufficient fixing of toner, setting this item to may solve the problem.OffOn( ) Fixing> or ● If you select , the printing speed will be slower.Reduce Ppr. SlippingDepending on the environmental conditions, paper may not be fed correctly during printing, resulting in adeteriorated print quality. In this case, setting this item may solve the problem. Specify the mode depending onwhether to give priority to paper sticking reduction effect or printing speed.Mode 1Mode 2Mode 3( ) Slipping> Select the modeThis mode is suitable for printing documents that contain pages where there are much text or image data.However, the printing speed may be slower.When printing documents whose amount of text or image data is small, selecting this mode will reduce thedegree of decrease in the printing speed as compared to .Setting Menu List429
