Canon LBP710Cx User Manual

Contents

Canon LBP710Cx User Manual Manual pdf 389 page image

( ) Check the message Settings> or Perform ahard reset ( Performing a Hard Reset(P. 498) )LPD SettingsEnable or disable LPD, a printing protocol that can be used on any hardware platform or operating system. Also,set the time period after which the print job automatically ends when print data cannot be received due to acommunication error or some other problem. Use the Remote UI to specify settings for banner page printingwhen LPD is enabled. Configuring Printing Protocols and WSD Functions(P. 200)LPD PrintOffOn( ) Check the message Settings> or Perform a hard reset (Performing a Hard Reset(P. 498) )RX Timeout *1 to 60 (min.)( ) Check the message Settings> Set Timeout Time Perform a hard reset (Performing a Hard Reset(P. 498) )RAW SettingsEnable or disable RAW, a Windows specific printing protocol. Also, set the time period after which the print jobautomatically ends when print data cannot be received due to a communication error or some other problem.Use the Remote UI to specify settings for bidirectional communication. Configuring Printing Protocols andWSD Functions(P. 200)RAW PrintOffOnSetting Menu List383