●You do not need to delimit the address with hyphens or colons.Check for entry errors●If MAC addresses are incorrectly entered, you may become unable to access the machine from theRemote UI, in which case you need to set to .Address Filter(P. 395)When [Reject] is selected for an outboundfilter●Outgoing multicast and broadcast packets cannot befiltered.Deleting a MAC address from exceptions●Select a MAC address and click [Delete].3Click [OK].6Perform a hard reset.●Click [Device Control], select [Hard Reset], and then click [Execute].➠The settings are enabled after the hard reset is performed.Using the operation panel●You can also enable or disable MAC addressfilteringfrom the setting menu of the operation panel.Address Filter(P. 395)LINKSSpecifying IP Addresses for Firewall Rules(P. 268)Security276
