3 Click [OK].4 Select the [Use Filter] check box and click the [Reject] or [Allow] radio button for the [DefaultPolicy].[Use Filter]Select the check box to restrict communication. Clear the check box to disable the restriction.[Default Policy]Select the precondition to allow or reject the communication of other devices with the machine.[Allow]Select to block communication packets when they are sent to or received fromdevices whose IP addresses are entered in [Exception Addresses]. Communicationswith other devices are permitted.[Reject]Select to pass communication packets only when they are sent to or received fromdevices whose IP addresses are entered in [Exception Addresses]. Communicationswith other devices are prohibited.Editing a set IP address from exceptions● Click the corresponding text link under [Exception Addresses], in the screen that has been displayedchange settings as necessary, and click [OK].Deleting an IP address from exceptions● Select an IP address to delete, and click [Delete].Security272
