● Select additional drivers from the following, according to the operating system of the print server.Print server Select the check box for32-bit operating systems [x64]64-bit operating systems● Windows Server 2003[Windows 2000, Windows XP and Windows Server 2003] under [Version]● Windows Vista/7/8/10/Server 2008/Server 2012[x86] under [Processor]● If you do not know whether your Windows Vista/7/8/10/Server 2008/Server 2012 is a 32-bit or 64-bitoperating system, see Checking the Bit Architecture(P. 663) .3 Insert the User Software DVD-ROM into the drive on the computer, and click [Browse].4 Specify the folder that contains additional drivers, select the INF file, and then click [Open].● Select the folder as shown below according to the operating system of the print server.If the print server runs a 32-bit operating systemSelect [UFR II]-your language-[x64]-[Driver] folder on the User Software DVD-ROM.If the print server runs a 64-bit operating systemSelect [UFR II]-your language-[32BIT]-[Driver] folder on the User Software DVD-ROM.5 Click [OK].➠ Installation of the additional drivers starts. Wait until the [Sharing] tab is displayed back.When [User Account Control] is displayed● Click [Yes].5 Click [OK].Network217
