➠ The settings are enabled after the hard reset is performed.Checking whether the settings are correct● Make sure that the Remote UI screen can be displayed with your computer by using the IPv6 address of themachine. Starting Remote UI(P. 336)Selecting settings from the operation panel● You can also enable or disable IPv6 addresses from the setting menu of the operation panel. IPv6Settings(P. 381)If you changed the IP address after installing the printer driver● By following the procedure for changing the standard TCP/IP port described in the "Printer DriverInstallation Guide", specify the port to use again.LINKSSetting IPv4 Address(P. 191)Network Status Print(P. 586)Network198
