UBI Stand-Alone Concept83DATA TRANSFER, cont'd.Transmission from Printerto PrinterContinued!We presume that the printers are already connected via a suitablecommunication cable fitted to the communication ports "uart1:" ofboth printers and that they are set up for the same communicationprotocol. We also presume that there is a sufficient amount of RAMmemory in the receiving printer to accommodate the data to betransferred.Starting from the Main Stand-Alone menu, proceed as follows onboth printers:Select Mode1:Run 2:SetSelect Set Mode by pressing < 2 >.1:Layout 2:Setup3:Transm 4:DateSelect the Transmission option by pressing < 3 >.0:Output 1:Input2:Keyb 3:DeviceFrom here on, you must proceed differently on the receivingand the transmitting printer.On the receiving printer, select the Input option by pressing the< 1 > key.Ready for inputPress ENTERPress < Enter >. A message will appear in the display:Receiving...Please waitThis printer is now ready to receive data.
