Menu
UBI EasyCoder 101 User Manual
Also see for EasyCoder 201 IISA: User guideUser manual
                                                                                                              | |
Contents
| 
UBI Stand-Alone Concept33X-coordinate– – – –The X-coordinate specifies the location of the insertion pointacross the web. The value is given as a number of dots starting fromthe origo. (The origo is specified in the printer's setup, see theTechnical Description of the printer).q Type 160 (no encoding), then press < Enter >.Y-coordinate– – – –The Y-coordinate specifies the location of the insertion point alongthe web. The value is given as a number of dots starting from theorigo.q Type 370 (no encoding) and press < Enter >.Font (0–9) <-><- .. ->The Font Select menu will look like above when you create a textfield for the first time. Once a font has been selected, it will showthe name of the selected font, e.g.:Font (0-9) <->2: SW030RSNContinued!OrigoX-coordinateY-coordinateDot line onprintheadPAPER FEEDDIRECTIONTEXT FIELDEDITING LAYOUTS, cont'd.Editing an Alpha-numericText Field, cont'd.Printhead density: 6 dots/mm1 mm = 6 dots1 inch = 152.4 dots1 dot = 0.166 mm (6.6 mils)Printhead density: 8 dots/mm1 mm = 8 dots1 inch = 203.2 dots1 dot = 0.125 mm (4.9 mils)Printhead density: 11.81 dots/mm1 mm = 11.81 dots1 inch = 300 dots1 dot = 0.085 mm (3.3 mils) |
Related manuals for UBI EasyCoder 201 IISA
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved