Menu
UBI EasyCoder 101 User Manual
Also see for EasyCoder 201 IISA: User guideUser manual
                                                                                                              | |
Contents
| 
UBI Stand-Alone Concept6SETUPParameter EasyCoder 101 SA EasyCoder 201 IISA EasyCoder 501 SA6 dot 8 dot 6 dot 8 dot 8 dot 11.81 dotContrast: < According to the enclosed labels >Baud rate: < 9600 >Parity: < None >Character length (see note): < 7 >Stop bits: < 2 >RTS/CTS: < Disabled >ENQ/ACK: < Disabled >XON/XOFF fr. host: < Enabled >XON/XOFF to host: < Enabled >New line: < CR/LF >LSS adjust: < According to the enclosed labels >Start adjust: < 0 >Stop adjust: < 0 >X-start: 0 8 0 0 0 0Width: 320 440 512 640 832 1280Length: 1200 1200 1200 1200 1200 1200Media type: < Labels (w gaps) >Printhead resistance: < Manual > < Automatic >Paper/ribbon type: < Ricoh 130 LAB/LAM > < UBI HP 20 >Performance: < Normal >Image buffer size: < 64 kbyte >Receive buffer size: < 6000 byte >Transmission buffer size: < 300 byte >Preparing the Printer,cont'd.Continued!q Setting Up the Printer See T/D & page 18Printers delivered directly from factory are always set up thesame way, as listed below. If you are not sure if the setup has beenchanged, or if you want to change the setup yourself, you can listthe present setup and enter the printer's Setup Mode, where youcan change any of the parameters.q National Characteristics See page 20As default, the printer is set up for the following nationalcharacteristics:• Character set: Roman 8• Time type: 24-hour cycle• Date structure: YYMMDD (YY=year, MM=month, DD=day)• Decimals: Decimal pointIf necessary, change the characteristics to better suit the countryor area where you intend to use your labels.q Paper Cutter Disable See page 22If your printer is fitted with an optional paper cutter, it isautomatically enabled at startup, but you can turn it off if youlike.USING THE UBI STAND-ALONE PRINTER, cont'd.Note:Transfer of labels and layouts from UBILabelShop or the use of the UBI ExternalKeyboard require the character lengthto be changed from 7 bits to 8 bits on theport used fore the connection. |
Related manuals for UBI EasyCoder 201 IISA
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved