UBI Stand-Alone Concept41EDITING LAYOUTS, cont'd.Editing a Bar Code FieldContinued!Field number– 3 Emptyq Start editing Field No. 3 by pressing < Enter >.1tx 2bc 3im 4ln5bx 6cn 7ti 8dq Select Bar code field by pressing < 2 >.Direction (1-4)The illustrations below show the four different print directions forbar codes:q Select Direction 1 by pressing < 1 >.For technical reasons, all thermal printers, regardless of brand,are best suited for “picket fence“ bar code printing. When highprint speed and/or very high quality is required, directions 1 or 3are to prefer.The nickname for bar code printingin directions 1 and 3is “picket fence”.The nickname for bar codeprinting in directions 2 and 4is “ladder”.PAPER FEEDDIRECTION01C39Print direction 101C39Print direction 3PAPER FEEDDIRECTION01C39Print direction 401C39Print direction 2Note:When a bar code field is edited, twosimilarly identical fields will be created,in this case field No. 3 and 4. See the endof this field for more information.
