UBI Stand-Alone Concept23All UBI Stand-Alone printers can be equipped with an optionallabel-taken sensor (LTS), which is a photoelectric sensor thatdetects if there is a label left in the printer's feed-out slot andprevents the printing of more labels until the label has beenremoved. Adjustment of the sensitivity of the LTS is described in theTechnical Description.To turn on or off the label-taken sensor, proceed as follows:Select Mode1:Run 2:SetSelect the Set Mode by pressing < 2 >.1:Layout 2:Setup3:Transm 4:DateSelect the Setup option by pressing < 2 >.1:List 2:Printer3:Nat 4:Cut 5:LTSelect the LTS option by pressing < 5 >.Lbl taken sensor0:Off 1:On 0The digit to the right in the lower line indicates the present setting.Type < 1 > to turn on the LTS, or < 0 > to turn off the LTS. Youwill then automatically return to the previous menu.1:List 2:Printer3:Nat 4:Cut 5:LTPress < Esc > to return to the main menu of the Set Mode.1:Layout 2:Setup3:Transm 4:DatePress < Esc > to return to the Main Stand-Alone menu.LABEL-TAKEN SENSOR
