| 
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE2 - 472306 Scanner Image location adjustmentof primary scanning direc-tion(scanner section)ALL 156<0-255>SYS When the valueincreases by “1”, theimage shifts by approx.0.0846 mm toward thefront side of the paper.1308 Scanner Distortion mode ALL - - Moves carriages to theadjusting position.(Chap. 3.2.4)6340 Scanner Reproduction ratio adjust-ment of secondary scan-ning direction(scanner section)ALL 129<0-255>SYS When the valueincreases by “1”, thereproduction ratio in thesecondary scanningdirection (vertical topaper feeding direction)increases by approx.0.223%.1354 RADF Adjustment ofRADF paperalignmentfor single -sided orig-inalALL 10<0-20>SYS When the valueincreases by “1”, thealigning amountincreases by approx.0.5 mm.1355 for doublesided orig-inalALL 10<0-20>SYS 1356 RADF Automatic adjustment ofRADF sensor andEEPROM initializationALL - SYS Performs the adjustmentand initialization whenthe RADF board orRADF sensor isreplaced.6357 RADF Fine adjustment of RADFtransport speedALL 50<0-100>SYS When the valueincreases by “1”, thereproduction ratio of thesecondary scanningdirection when using theRADF increases byapprox. 0.1%.1358 RADF RADF sideways deviationadjustmentALL 128<0-255>SYS When the valueincreases by “1”, theimage of original fedfrom the RADF shiftstoward the rear side ofpaper by approx.0.0846 mm.1359 Scanner Carriage position adjust-ment during scanning fromRADFALL 128<0-255>SYS When the valueincreases by “1”, the car-riage position whenusing the RADF shifts byapprox. 0.1 mm towardthe original feeding side.1365 RADF RADF lead-ing edge posi-tionadjustmentfor single -sided orig-inalALL 50<0-100>SYS When the valueincreases by “1”, thecopied image of originalfed from the RADF shiftstoward the trailing edgeof paper by approx.0.1 mm.1366 for doublesided orig-inalALL 50<0-100>SYS 1Adjustment mode (05) Code Classi-fication Items Func-tionDefaultablevalue>RAM Contents Proce-dure |
