Toshiba e-studio200l Service Manual

Also see for e-STUDIO200L: User guide Operator's guide Service manual Service handbook Service handbook

Contents

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 FIRMWARE UPDATING6 - 696(4) Turn ON the power while [4] button and [9] button are pressed simultaneously.The screen for selecting the items to be updated is displayed after 3 minutes. “*” is displayednext to the items to be updated. (All items other than "0. OS Update" are selected in the defaultsettings.)Fig.6-72Note:Note:The display of items on this screen varies depending on the types of data written on the USBstorage device. Each item is displayed only when each data file is written on the USB storagedevice in the following conditions.If the USB storage device is not recognized properly, the following message is displayed. In thiscase, turn OFF the power of the equipment and connect the device properly. Then repeat theprocedure from (4).Fig.6-73Item Condition0. OS Update ROM.bin is written.1. HDD Update All master data files (1, 2, 3 ... n) are written.2. UI Data Update ROM.bin is written.3. System Firmware Update sysfirm.bin and ROM.bin are written.4. NIC Firmware Update ROM.bin is written.5. Scanner Firmware Update ROM.bin is written.6. Machine Firmware Update ROM.bin is written.