| 
e-STUDIO200L/202L/230/232/280/282 ADJUSTMENT June 2004 © TOSHIBA TEC3 - 283.4.2 Adjustment of image densityThe image density level is adjustable both at standard and toner saving modes.< Adjustment Mode (05) >(1) While pressing [0] and [5] simultaneously, turn the power ON.(2) Key in a code and press the [START] button.(3) Key in the sub code (0, 1, 2, 3 or 4), and press the [START] button.(4) Key in an adjustment value.(To correct the keyed-in value, press the [CLEAR] button.)(5) Press the [ENTER] or [INTERRUPT] button to store the value in memory. The equipment goesback to the ready state.(6) For resetting the value, repeat step (2) to (5).(7) Turn the power OFF and then back ON to perform printing job.(8) If the desired image density has not been attained, repeat step (2) to (7).Toner modeItem to be adjusted RemarksStandard Toner saving672-0 to 4 676-0 to 4 Adjustment of image density When the value is decreased, text becomeslighter.Acceptable values: 0 to 10Notes:1. Set not to reverse the large andsmall number of the setting valuecorresponding to the sub code.Ex.) When substituting the settingvalue for 672-0 with A0, · · ·, 672-4 with A4: A0 A1 A2 A3 A42. Remember that the image speci-fications and life span of thereplacing parts may not meet thestandard when the setting valueis changed from the default value. |
