| 
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE2 - 1312986 General Copy function setting PPC 0<0-1>SYS Sets the copy functionto be invalid.0: Valid1: Invalid1988 PaperfeedingSetting of paper sizeswitching to 13” LGALL 0<0-2>SYS 0: Not switched1: LG ! 13”LG2: FOLIO ! 13”LG1995 Version Equipment number (serialnumber) displayALL 0<10 dig-its>SYS This code can be alsokeyed in from theadjustment mode (05-976).10 digits11999 Mainte-nanceFSMS total counter ALL 0<8 digits>SYS Refers to values of totalcounter11001 Mainte-nanceReset of NIC board ALL 3<1-3>NIC 1: Cold 2: Warm3: Not reset121002 Network Selection of NIC board sta-tus informationALL 1<1-2>NIC 1: Not printed outwhen the equipmentis restarted2: Printed out whenthe equipment isrestarted121003 Network Speed setting of Ethernet ALL 3<1-3>NIC 1: 10 MBPS2: 100 MBPS3: Automatic121004 Network NIC Web password ALL - NIC Writing only (Currentsetting is not dis-played.)Maximum 31 letters121005 Network Availability of IP ALL 1<1-2>NIC 1: Available2: Not available121006 Network Address Mode ALL 2<1-5>NIC 1: Fixed IP address2: Dynamic IP address3: Dynamic IP addresswithout AutoIP4: Dynamic IP addresswithout BOOTP5: Dynamic IP addresswithout DHCP121007 Network Domain name ALL - NIC Maximum 96 letters 121008 Network IP address ALL - NIC 000.000.000.000-255.255.255.255(Default value000.000.000.000)121009 Network Subnet mask ALL - NIC 000.000.000.000-255.255.255.255(Default value000.000.000.000)121010 Network Gateway ALL - NIC 000.000.000.000-255.255.255.255(Default value000.000.000.000)121011 Network Availability of IPX ALL 1<1-2>NIC 1: Available2: Not available12Setting mode (08) Code Classifi-cation Items Func-tionDefaultablevalue>RAM Contents Proce-dure05/05 |
