VIPedgeFeature Operations46 TOSHIBA VIPedge UG 12/12Speed Dial Capabilities Go to Enterprise Manager.1. Click on Station > Station Assignment.2. Click on the Basic tab.3. Enter the desired number of SpDial Bins.4. Set System Speed Dial to enable/disable. Default is Disable.5. Click on the Save icon.Long SD Numbers Up to 32 digits can be stored in one SD location. If you exceed 32 digits, theexcess digits are automatically stored in the next sequential SD location. If SD100 contains 40 digits, then 8 of those digits would be stored in SD 101. If yousave other digits to SD101 they will over-write the eight digits automaticallystored there.Storing Personal SpeedDial NamesYou can store names with Personal Speed Dial numbers. These names willdisplay as Soft Keys which can be used for dialing from the telephone LCDdirectories.Notes:• Speed Dial locations must be assigned to your telephone by your SystemAdministrator before you can store names. Your System Administratorcan also associate names with Station Speed Dial numbers.• Only the Administrator telephone can store System Speed Dial numbers.Assign Station Speed DialNamesWeb-based User Administration1. Login and select Speed Dial, then select or enter the desired Speed DialIndex and set the number and name.2. Enter a Speed Dial location number (100~199 for personal speed dial or200~999 for System speed dial, depending on system programming).3. Enter the telephone number to be stored. If you normally dial a lineaccess code (such as 9) and/or an area code, enter the codes before thetelephone number.4. Input the name you want to appear in the Personal SD directory (ninecharacters max).5. Click on Save icon to register the information.Time and Date Setting(Local) IP telephones will display the time, day and date of the time zone of thetelephone system location it is connected to. If the IP telephone is not locatedin the same time zone as the telephone system, the IP telephone can be usedto change the time, day and date of the IP Telephone to the local time zone inwhich the telephone is located.To change the Date• From the IP telephone, dial #653 and enter YYMMDD#Example: To set the date to March 12, 2008.YY = Year, example 08MM = Month, example 03DD = Day, example 12
