VIPedgeThe Basics18 TOSHIBA VIPedge UG 12/12Making a Call There are three ways to originate a call from the telephone:Handset 1. To make a call, lift the handset, then dial the number.A line may be automatically selected or choose a line manually. Dial tone isheard through the handset. The Speaker and Microphone LEDs do not light.Digits display as they are dialed. Call progress tones (Ringback Tone, BusyTone, etc.) are heard through the handset.2. When connected, continue using the handset or switch to speakerphoneby holding down Spkr and placing the handset in the cradle.Spkr Button 1. To make a call, press Spkr.A line may be selected automatically or choose a line manually. Theextension or Line button lights (depending on system programming). Dialtone is heard through the speaker. The Speaker and Microphone LEDs light.2. Dial the number.Digits display as they are dialed. Call progress tones (Ringback Tone, BusyTone, etc.) are heard through the speaker.When connected, continue using the speakerphone or lift the handset tocontinue the conversation.Hot Dialing 1. To make a call using Hot Dialing, start dialing the number.The extension button, Spkr and Mic LEDs light. Digits display as they aredialed. Call progress tones (Ringback Tone, Busy Tone, etc.) are heardthrough the speaker.2. When connected, continue using the speakerphone or lift the handset tocontinue the conversation.Dial Directory Calls can be made by selecting a name from the alphabetical telephonedirectory.To access the Directory1. Press DIR soft key.Select Directory menu appears.The soft keys on the Select Directory are:My = Personal Speed Dial NamesEXTR = System Speed Dial NamesINTR = Directory Number NamesDial = Cancel directory, get dial tone.2. Choose the directory you wish to access and use the dial pad to enter thename.Notes:• If a directory is not selected and a name is entered, all directories will besearched.
